USING DUKTO

CLI reference

Use the same local transfer engine with commands that fit your scripts.

Discover devices

The output lists the ID, name, platform, addresses, port, and protocol version of receivers discovered through mDNS.

TERMINAL

dukto --json peers --timeout 10

Receive

By default, the CLI asks for approval for each incoming transfer. Use a different port from the desktop app when both run on the same computer.

TERMINAL

dukto --name Studio receive --destination ./received --port 4243

Explicit automation

--accept authorizes incoming transfers for this process only. --once exits after one attempt. Without an interactive terminal, --accept is required. Use a dedicated destination folder for tests.

TERMINAL

dukto --json receive --destination ./received --port 4243 --accept --once

Send by ID or address

Use an IPv4 address. --timeout sets the total send deadline in seconds (default: 300). On a receiver, it limits each active connection, not idle wait time.

TERMINAL

dukto send --peer ID -- ./folder

# Use an address if discovery is unavailable
dukto send --address 192.168.0.16:4243 -- ./folder

Read the result

--json emits one JSON event per line. A sent event includes acknowledged: true only after the receiver confirms completion. Exit code 0 means success; failures return a nonzero code. A continuous receiver reports receive_error and continues. Use --data-dir to isolate device identity data.

Documentação da versão em desenvolvimentoSugerir uma melhoria

CONTINUE EXPLORANDORede e descoberta